Version 2.0 The products and specifications, configurations, and other technical information regarding the products contained in this manual are
subject to change without notice. All statements, technical information, and recommendations contained in this manual are believed to
be accurate and reliable but are presented without warranty of any kind, express or implied, and users must take full responsibility for
their application of any products specified in this manual.
The following third-party software may be included with your product and will be subject to the software license agreement.
Network Time Protocol (NTP). Copyright © 1992, David L. Mills. The University of Delaware makes no representations about the
suitability of this software for any purpose.
Point-to-Point Protocol. Copyright © 1989, Carnegie-Mellon University. All rights reserved. The name of the University may not be used
to endorse or promote products derived from this software without specific prior written permission.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, THE CD-ROM, THE CD-ROM SOFTWARE, AND THE DOCUMENT
FILES AND SOFTWARE OF THE ABOVE-LISTED SUPPLIERS ARE PROVIDED "AS IS" WITH ALL FAULTS. CISCO AND THE
ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THOSE OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE OR ARISING FROM A COURSE OF DEALING, USAGE, OR
TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL
DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE
OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Notice of Restricted Rights:
Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer
Software - Restricted Rights clause at FAR §52.227-19 and subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software
clause at DFARS §252.227-7013. The information in this manual is subject to change without notice.
AtmDirector, Catalyst, CD-PAC, Cheetah Web Server, CiscoAdvantage, CiscoFusion, Cisco IOS, the Cisco IOS logo, CiscoPro, Cisco
Systems, CiscoView, CiscoVision, CiscoWorks, ClickStart, ControlStream, EtherChannel, EveryWare, FastCell, FastForward,
FastManager, FastMate, FragmentFree, HubSwitch, Internet Junction, LAN2LAN Enterprise, LAN2LAN Remote Office, LightSwitch,
Newport Systems Solutions, Packet, Phase/IP, PIX, Point and Click Internetworking, RouteStream, Secure/IP, SMARTnet, StreamView,
SwitchBank, SwitchProbe, SwitchVision, SynchroniCD, The Cell, TokenSwitch, TrafficDirector, VirtualStream, VlanDirector, WNIC,
Workgroup Director, Workgroup Stack, and XCI are trademarks; Access by Cisco and Bringing the power of internetworking to
everyone are service marks; and Cisco, the Cisco Systems logo, CollisionFree, Combinet, EtherSwitch, FastHub, FastLink, FastNIC,
FastSwitch, Grand, Grand Junction, Grand Junction Networks, the Grand Junction Networks logo, IGRP, Kalpana, the Kalpana logo,
LightStream, MultiNet, MultiWare, Personal Ethernet, and UniverCD are registered trademarks of Cisco Systems, Inc. All other
trademarks, service marks, registered trademarks, or registered service marks mentioned in this document are the property of their
respective owners.
Using Cisco TCP/IP Suite 100 for Windows
May 1996
Copyright © 1995-1996, Cisco Systems, Inc.
All rights reserved. Printed in USA.
962R
HTML file generated May 15, 1996.